| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Peanut Shredder Introduction
Peanut shredder is consists of three sections of feeding, chopping and classification which vibration feeding section can enable the peanuts to evenly fall into the container where the peanuts are being evenly chopped by rolling knives, in the classification section sieves of different sizes are installed which the peanuts into different sizes.
Parameters of Nut Walnut Almond Crusher
| Model | LFM-ZQ10A |
| Capacity | 100-200Kg/h |
| Power | 2.2kw |
| Dimension | 2700*1000*1350 mm |
| Weight | 650kg |
| Voltage | 380V,50HZ |
| Cutting Size | 2-10 mm |
Application of Hazelnut Crusher
This hazelnut crusher is mainly used for the chopping of nuts (such as peanuts, almonds, cashews, walnuts, hazel) and other materials of different sizes in the food processing industry.Working Principle Of Peanut Chopping Cutting Machine
The material is evenly discharged through the hopper, and the cutting material is sent to the hob shredding mechanism by the feeding mechanism, which is quickly and roughly cut into large particles. The large particles obtained by rough cutting are then conveyed by the conveyor belt to two sets of reciprocating shredding mechanisms for shredding. The reciprocating speed of the cutter is constant. By changing the speed of the conveyor belt, the number of times the material is sheared is increased, so as to achieve the purpose of adjusting the particle size.
Operation Points Peanut Chopping Cutting Machine
1. Set the shredder pads to be stable and level. If you do not move frequently, you can place rubber and other shock-absorbing materials under the 4 bottom corner plates and fix them with expansion bolts.
2. The discharge ports at all levels are properly connected with the material box. After installation, turn on the power and turn it on to see if it rotates in the forward direction and rotates normally.
3. Before starting each motor, be sure to check all transmission parts, conveyor belts and cutter parts, and there are no tools left behind by foreign objects.
){kind=link}